RME ADI-2-FS
Convertisseur AN/NA haut de gamme 2 canaux
AD
Signal to Noise ratio (SNR) @ +19 dBu: 117 dB RMS unweighted, 121 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz
Frequency response @ 96 kHz, -0.5 dB: 3 Hz – 45.5 kHz
Frequency response @ 192 kHz, -1 dB: 2 Hz – 92.7 kHz
THD @ -1 dBFS: -114 dB, 0.00015 %
THD+N @ -1 dBFS: -112 dB, 0.00025 %
Channel separation: > 110 dB
Max Input Level AD: +19 dBu
Input: XLR or 1/4" TRS, electronically balanced
Input impedance balanced: 36 kOhm, unbalanced: 18 kOhm
Input sensitivity switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS
DA
Signal to Noise ratio (SNR): 117 dB RMS unweighted, 120 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 10 Hz – 20.2 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 44.9 kHz
Frequency response @ 192 kHz, -1 dB: 3 Hz – 88 kHz
THD @ -1 dBFS: -112 dB, 0.00025 %
THD+N @ -1 dBFS: -110 dB, 0.00032 %
THD @ -3 dBFS: -116 dB, 0.00016 %
Channel separation: > 110 dB
Max Output Level DA: +19 dBu
Output: XLR balanced, 1/4" TRS unbalanced/balanced
Output impedance: XLR balanced 150 Ohm, TS unbalanced 100 Ohm
Output level switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS
DA - Phones
as DA, except:
Output: 6.3 mm stereo TRS, unbalanced
Output impedance: 0.1 Ohm
Output level at 0 dBFS, load 100 Ohm or up: +19 dBu (6.9 Vrms)
Max power 32 Ohm load: 0.7 W per channel (0.01% THD, +16 dBu, 4.9 Vrms)
THD 32 Ohm load @ +15 dBu: -110 dB, 0.0003 %
Mode ANA (Analog In to Analog Out)
Signal to Noise ratio (SNR) @ +19 dBu: 123 dB RMS unweighted, 126 dBA
Signal to Noise ratio (SNR) @ +13 dBu: 119 dB RMS unweighted, 122 dBA
Signal to Noise ratio (SNR) @ +4 dBu: 112 dB RMS unweighted, 115 dBA
Frequency response -0.5 dB: 1 Hz – 120 kHz
THD+N @ +19 dBu: -116 dB, 0.00016%
Channel separation: > 120 dB
Maximum input / output level: +22 dBu
Digital
Clocks: Internal, ADAT In, SPDIF In
Jitter suppression of external clocks: > 50 dB (2.4 kHz)
Effective clock jitter influence on AD and DA conversion: near zero
PLL ensures zero dropout, even at more than 100 ns jitter
Digital Bitclock PLL for trouble-free varispeed ADAT operation
Supported sample rates with external clocking (SPDIF): 28 kHz up to 200 kHz
Supported sample rates with external clocking (ADAT): 40 kHz up to 49 kHz
Internal clocks: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176,8 kHz, 192 kHz
Digital I/O
Digital input coaxial ground-free transformer coupled
Formats: optical (TOSLINK), RCA (SPDIF, AES/EBU compatible)
Format Consumer SPDIF according to IEC 60958
Format Professional according to AES3-1992 Amendment 4
SPDIF coaxial
RCA, according to IEC 60958
High-sensitivity input stage RCA: < 0.2 Vpp input level
Output voltage RCA Consumer 0.7 V, Professional 1.4 V
Single Wire mode, sample rate 28 kHz up to 200 kHz
SPDIF optical
1 x optical, according to IEC 60958
Sample rate 28 kHz up to 200 kHz
ADAT
TOSLINK
Standard: 8 channels 24 bit, up to 48 kHz
Double Speed (S/MUX): 4 channels 24 bit 96 kHz
Quad Speed (S/MUX4) : 2 channels 24 bit 192 kHz
General
Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts
Idle power consumption: 5,2 W (430 mA @ 12V)
Max. power consumption: 10 Watts (830 mA @ 12 V)
Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1")
Weight: 900 g ( 2.0 lbs)
Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
Relative humidity: < 75%, non condensing
